Using Smart Capture
You can shoot video clips in the
following formats:
Non-compressed:
Video 160 x 120, 24 bits,
max. 10 frames/sec.
Audio PCM, 11.025 kHz,
16 bits, monophonic
Compressed:
Video MPEG1 160 x 112,
maximum of 30 frames/
sec (effective maximum
equivalent to 10 frames/
sec).
Audio MPEG1, 44.1 kHz
(effective maximum
equivalent to 11.025
kHz), monophonic.
A gap may appear when a
rapid-moving object is
displayed. However this is not
a malfunction.
Shooting a video clip
You can use Smart Capture to shoot (capture) video clips with a Video Camera
connected to your computer, as well as play them or send them via e-mail.
1
Launch Smart Capture. Select Movie using the Switch Capture Mode button.
2
The image will appear in the finder. Turn the camera towards the subject.
3
Adjust the image.
4
Click the Capture button to shoot a video clip (you can shoot up to 60 seconds,
according to the settings you chose in the Recording options section).
5
Click the Capture button when finished. The Movie Player window opens and the
captured video clip appears in the Movie Player window.
n N
Click here
16