Table of Contents
Advertisement
Connecting peripheral devices
Connecting a Universal Serial Bus (USB) device
You can connect a USB device (e.g. mouse, floppy disk drive...) to your computer.
You do not need to shut down the computer before connecting or disconnecting a USB peripheral.
When you start your notebook with a USB hub connected to it, make sure that a device is connected to the
USB hub. If you encounter problems booting when a USB hub is connected to your notebook, unplug the
hub and reboot.
Connecting a USB mouse
To connect a USB mouse, proceed as follows:
Plug the USB cable (1) into the USB connector (2) identified by the
symbol.
You can connect the optional Sony USB mouse (PCGA-UMS1
series). As the driver for this mouse is preinstalled on your
computer, you can use the mouse by just connecting it.
Your computer does not include any Serial or PS/2 connectors.
n N
53
Advertisement
Table of Contents
