Assembly Instructions - modway EEI-3367 Quick Start Manual

Chair
Chair
Chair
Chair
Chair
Position one of Front Legs (2) at the corresponding wooden corner as shown.
Insert 2 pieces of Bolts (A) with 2 pieces of Plastic Washers (B) into the pre-drilled holes on the apron
of Chair Body (1) through the pre-drilled holes on Front Legs (2).
Repeat the same steps for the remaining Front Leg (2) and Back Legs (3).
Use Allen Wrench (C) to tighten all the Bolts (A) clockwise as shown, but do not fully tighten Bolts (A)
for either leg at this step.
3
3
C
A
A B
B
2
2
C