Stopping The Bluetooth™ Connection - Sony VAIO PCG-C1MGP Software Manual

Using Bluespace
Stopping the Bluetooth™ connection
To stop the Bluetooth™ connection, proceed as follows:
1 Click the service button of the service from which you wish to disconnect.
2 Click Yes in the Confirm Service Disconnection dialog box.
3 Turn off the Bluetooth™ switch located at the front of your notebook.
4 Click Yes to turn off Bluetooth power.
The Bluetooth™ LED turns off.
Important notice concerning Bluetooth™/BlueSpace
When activating Bluetooth™ for the first time, it will initialize itself. During this initialization, it is possible
that you get a Found New Hardware Wizard.
Steps to follow when the Found New Hardware Wizard for Bluetooth™ appears
The Bluetooth™ virtual COM may be detected when the Bluetooth™ function is turned on/off. This is the
case when the Found New Hardware Wizard window appears with the message This wizard allows you
to install the software linked to the detected hardware/ Bluetooth Virtual COM...
To make sure the Bluetooth™ function works properly after this window appears, proceed as follows:
1 Click the Next button in the Found New Hardware Wizard window.
2 Click the Finish button.
3 If the Found New Hardware Wizard window appears again, repeat steps 1 and 2.
n N
25