Cleaning & Maintenance - GE PFTS06AA Owner's Manual

Set up and Use
Cleaning and Maintenance
WARNING Be sure to unplug from the electrical supply source before cleaning or changing the filter.
• Do not use liquids to clean the air purifier.
• Do not attempt to disassemble the air purifier for cleaning.
• Wipe the exterior of the air purifier with a soft, dry cloth. Make sure the particle sensor does not become
clogged with dust.
• If necessary, wipe only the exterior housing with a damp cloth, then immediately dry.
• You can vacuum the inside of the air purifier.
Filter Installation
Your air purifier comes with a 3-stage (Pre-filter + High Efficiency + Activated Carbon) Filter. To access the filter, turn
the bottom filter cover by the handle counterclockwise (towards the unlock symbol) to remove it. Lift the filter out of the
air purifier. Remove the plastic bag and reinstall the filter.
Replace the filter cover by turning it clockwise (towards the lock symbol) until it locks in place.
Bottom cover handle
The REPLACE FILTER indicator light will illuminate after 2,000 hours of use. You may need to replace the filter if you
notice that the filter appears dirty or air purification seems to have decreased. If you notice that the filter is visibly dirty
or air purification seems to have decreased, the filter should be replaced.
NOTE: After replacing the filter, press the REPLACE FILTER indicator light for 3 seconds until the control panel lights
illuminate and the unit does not make any make a beeping sound in order to reset it.
Storage
If you are not going to use the air purifier for a long time make sure it is clean and dry. Wrap the filter in plastic. Store
in a cool dry place.
49-5000555 Rev. 0
Bottom cover rotating handle
Filter
9