Toshiba 40LV675D Service Manual page 4

ADJUSTMENT [LCD Color Television] ASIA_EU
Test signal selection
Selection of the adjustment items
Change of the data value
Adjustment menu mode ON/OFF
Initialization of the memory (IC510)
Reset the count of operating
protect circuit to "00"
Turn off TV Micro I2C bus communication
"RCUT" selection
"GCUT" selection
"BCUT" selection
"CNTX" selection
"COLC" selection
"UVTT" selection
Automatic A/D Adjustment
(PC, Component, Composite (PAL, NTSC))
Self diagnostic display ON/OFF
Selecting the Adjusting Item
Every pressing of PROGRAMME
items in the order of table below. (
SETTING & ADJUSTING DATA
[ SERVICE MODE ]
ADJUSTING ITEMS AND DATA IN THE SERVICE MODE:
Note:
The image system data of RCUT-BDRV is different by each image format.
The PAL value is indicated in the table.
Item
file://C:\Documents and Settings\Alexsandr\Рабочий стол\40LV675D Ver. 2.01\Tosh...
PROGRAMME
Volume
MENU button (on TV)
"i+" + PROGRAMME
"i+" + PROGRAMME
"i+" + Volume
1 button
2 button
3 button
4 button
5 button
6 button
7 button
9 button
button in the Service Mode changes the adjustment
button for reverse order)
Name of adjustment
(on TV or remote control)
+/- (on TV or remote control)
button on TV
button on TV
button on TV
Address
Стр. 3 из 24
13.05.2015