Riverside Furniture Regan 27359 Assembly Instructions

Components and Hardware List
To prevent possible scratches and damage, this furniture
must be assembled by two people on a soft surface such as a
blanket or carpet.
Do not fully tighten the bolts until the
complete chair has been assembled. Once the
complete chair is assembled, set it upright on a
flat surface to level the chair. Using the
provided Allen Key, tighten all the bolts.
Make sure the stretchers are pulled snug to the
front and back legs, then install the wood
screws (L) using your Phillips screwdriver.
Regan
Dining Room
Assembly Instructions
1 Left &
1 Right
Made in Viet Nam
1 Left &
1 Right
#27359 & 27459
X-Back Counter Stool
Be sure to check all packing
material carefully for small
parts, which may have come
loose inside the carton during
shipment.
Page 1 of 2