Riverside Furniture Cascade Dining Room 73455 Assembly Instructions

Riverside
Furniture
email:info@riverside-furniture.com
Components and Hardware List (for one chair)
Chair Back Front Legs
1 Left / 1 Right
1pc.
A B
Front Strecher
1 pc.
D
E
5/16" x 19mm x 2mm
5/16" x 12mm x 3mm
Lock Washer Flat Washer
8pcs.
G
H
Be sure to check all packing material carefully for small parts, which may have come loose inside
the carton during shipment.
STEP 2
F
G
I
Do not fully tighten the bolts until the complete chair has been assembled.
Once the complete chair is assembled, set it upright on a flat surface to level
the chair. Using the provided allen wrench, tighten all the bolts.
Make sure the stretchers are pulled snug to the front and back legs, then
install the wood screws (J) using your Phillips screwdriver.
Cascade
Dining Room
Assembly Instructions
Back Legs Frame
2 pcs. C
Side Strecher
5/16" × 2" Long
1 Left / 1 Right
Allen Head Bolt
2 pcs.
F
5mm
Allen Wrench
8pcs. I
A
H
Made in Viet Nam
1 pc.
8pcs.
#8 x 1-1/4"
Wood Screw
1pc.
J
D
B
C
Page 1 of 1
73455
UPH CURVE-BACK
COUNTER STOOL
6 pcs.
B
STEP 1