Advertisement
Table of Contents
- 1 Detail 1: Remove the Drawer from the Top (A)
- 2 Detail 2: Assemble the Left (B) and Right Side Panels (C)
- 3 Detail 3: Set the Assembled Top and Sides Upright
- 4 Detail 4: Assemble the Shelf (F)
- 5 Note: the Levelers Located Underneath the Corners of the Pier
- 6 Detail 5: the Wiring from the LED Light Strips
- 7 Step 6: Reinstall the Drawer
- 8 Furniture Tipping Restraint Kit
- Download this manual
email:
info@riverside-furniture.com
1 pc.
1 pc.
5
5
Ø
-18 × 2" Long
Ø
-18 × 1" Long
16
16
Allen-Head Bolt
Allen-Head Bolt
4 pcs.
Be sure to check all packing material carefully for small parts, which may have come loose inside the
carton during shipment. To prevent possible scratches or damage, this furniture should be assembled
on a soft surface such as a blanket or carpet.
Precision
Bed Room
Assembly Instructions
1 pc.
1 pc.
1 pc.
Ø5/16" x 12 x
3mm Spring
Washer
20 pcs.
2 pcs.
5
Ø
-18 × 1-1/2" Long
16
Allen-Head Bolt
16 pcs.
Ø5/16" x 19 x
4mm Allen
2mm Flat
Wrench
Washer
20 pcs.
Page 1 of 4
Made in Viet Nam
1 pc.
21879
LOW PIER NIGHTSTAND
Mending Plate
1 pc.
2 pc.
Anti-tipping
Restraint Kit
1 pc.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Riverside Furniture Precision Bed Room 21879
Summary of Contents for Riverside Furniture Precision Bed Room 21879
- Page 1 Page 1 of 4 Precision Made in Viet Nam Bed Room Assembly Instructions email: info@riverside-furniture.com 1 pc. 1 pc. 1 pc. 1 pc. Ø -18 × 1-1/2" Long Allen-Head Bolt 21879 LOW PIER NIGHTSTAND 1 pc. 16 pcs. 1 pc. Ø5/16"...
- Page 2 Page 2 of 4 Precision Made in Viet Nam Bed Room Assembly Instructions email: info@riverside-furniture.com Detail 1 : Remove the drawer from the Top (A) and lay it aside. To remove the drawer, pull the drawer fully open so the black latch is visible in the inside channel of the guides.
- Page 3 Page 3 of 4 Precision Made in Viet Nam Bed Room Assembly Instructions email: info@riverside-furniture.com Detail 4 : Assemble the Shelf (F) using the 2" Long Bolts (I), Spring Washers (K) and Flat Washers (L). Adjust fit of all parts if necessary and tighten Bolts with the Allen Key (M).
- Page 4 Page 4 of 4 Precision Made in Viet Nam Bed Room Assembly Instructions email: info@riverside-furniture.com Step 6: Reinstall the drawer by aligning the channels on the drawer with the ball bearings in the channels of the cabinet members and gently pushing the drawer closed. For product and personal safety, a Furniture Tipping Restraint kit has been included with the nightstand pier which can help to...
Need help?
Do you have a question about the Precision Bed Room 21879 and is the answer not in the manual?
Questions and answers