Set-Up Instructions - Gearmore L-60-60-HD Operation, Service & Parts Manual

SET-UP INSTRUCTIONS

1. Bolt the a-frame to inside of uprights and the lift arms to outside of
uprights (Ref. #1 & 2). Leave bolts loose.
2. Install lift arm brace (Ref. #3) to rear tailwheel a-frame using longer
bolts supplied. Leave bolts loose.
3. Install top swivel to front a-frame in the following order, using round
bushing and swivel, as shown in picture. You may need to trim round
bushing if it extends out to far.
4. After everything is assembled, proceed with tightening down all loose
hardware with an impact gun.
L-60-60-HD
Page 2