Advertisement
Quick Links
Riverside
email:
info@riverside-furniture.com
Hardware and Parts packed with the King Storage Footboard
King Roll Slat
King Storage
Footboard
F-A
1 pc.
F-B
5
5
Ø
-18 x 1-1/4" Long
Ø
-18 x 3" Long
16
16
Allen Head Bolt
Allen Head Bolt
2 pcs.
F-E
F-F
#8 x 1" Wood
5mm Allen Wrench
Screw
F-I
30 pcs.
F-J
Hardware and Parts packed with the 5/0-6/6 Bed Rails
Queen / Eastern King
Bed Rail
R-A
12mm Open Wrench
Wood Dowel Pin
R-F
R-G
8 pcs.
Hardware and Parts packed with the 6/0 California King Bed Rails
California King Bed
Rail
R-A
12mm Open Wrench
Wood Dowel Pin
R-F
R-G
8 pcs.
Be sure to check all packing material carefully for small parts, which may have come loose inside the carton
during shipment. To prevent possible scratches or damage, this furniture should be assembled on a soft surface
such as a blanket or carpet.
To prevent possible damage to furniture and personal injury, it is recommended that two people are used to
assemble and set-up this bed.
Precision Bed Room
King Bed
FURNITURE
Assembly Instructions
Slat Support Rails
Part B
Part A
1 pc.
F-C
5
Ø
x 12 x 3mm
16
Spring Washer
2 pcs.
F-G
1 pc.
5
Ø
-18 x 4-1/2 " Long
16
All-Thread Bolt
R-B
8 pcs.
2 pcs.
4 pcs.
5
Ø
-18 x 4-1/2 " Long
16
All-Thread Bolt
R-B
8 pcs.
2 pcs.
4mm Allen Wrench
1 pc.
R-H
4 pcs.
Slat Support Leg
2 pcs.
F-D
1 pc.
5
Ø
x 19 x 2mm
16
Flat Washer
F-H
4 pcs.
4 pcs.
5
Ø
-18 Hex Nut
16
R-C
8 pcs.
5
Ø
-18 Hex Nut
16
R-C
8 pcs.
Note: The Allen Wrench (R-H) is used to remove, then reattach
the Filler Rail mounted at the top edge of the California King
Bed Rails.
Page 1 of 3
Made in Viet Nam
21480 / 21880
LOW HEADBOARD
21484 / 21884
TALL HEADBOARD
21485 / 21885 6/0-6/6 STORAGE FOOTBOARD
21476 / 21876 5/0-6/6 BED RAILS --OR--
21486 / 21886 6/0 BED RAILS
21482 / 21882
LOW UPH HEADBOARD
21488 / 21888
TALL UPH HEADBOARD
21485 / 21885 6/0-6/6 STORAGE FOOTBOARD
21476 / 21876 5/0-6/6 BED RAILS --OR--
21486 / 21886 6/0 BED RAILS
5
Curved Washer
Ø
x 12 x 3mm
16
32 L x 13 x 8mm
Spring Washer
R-D
R-E
8 pcs.
5
Curved Washer
Ø
x 12 x 3mm
16
32 L x 13 x 8mm
Spring Washer
R-D
R-E
8 pcs.
8 pcs.
8 pcs.
Advertisement
Related Manuals for Riverside Furniture 21485
Summary of Contents for Riverside Furniture 21485
- Page 1 Part B Part A 1 pc. 1 pc. 2 pcs. 1 pc. 21485 / 21885 6/0-6/6 STORAGE FOOTBOARD 21476 / 21876 5/0-6/6 BED RAILS --OR-- 21486 / 21886 6/0 BED RAILS Ø -18 x 1-1/4" Long Ø x 12 x 3mm Ø...
- Page 2 Headboard and connect using the Curved Washers (R-E), Spring Washers (R-D), and Hex Nut (R-C). Only partially tighten the Nuts until the Footboard 21485 / 21885 6/0-6/6 STORAGE FOOTBOARD has been connected. Repeat for other Bed Rail. 21476 / 21876 5/0-6/6 BED RAILS --OR-- 4.
- Page 3 After the Bed is assembled, completely unroll the Bed Roll Slat (F-B) onto the Bed. 21485 / 21885 6/0-6/6 STORAGE FOOTBOARD 21476 / 21876 5/0-6/6 BED RAILS --OR-- For an Eastern King Bed, disregard Steps 1 and 3 shown below.