Riverside Furniture 21357 Assembly Instructions

Aberdeen dining room

Download this manual

Components and Hardware List (for one chair)

Be sure to check all packing material carefully for small parts,

which may have come loose inside the carton during shipment.

Separate and check all parts against the Components Hardware

List above.

Step 1: Place the chair back on a padded surface, and assemble the chair seat to the chair back (as

shown Step 1), using the

Install the

long bolts (F), using the same washers, into the back corners of the chair seat.

Do not fully tighten any bolts until after the chair has been completely assembled.

#21357-1

Aberdeen

Dining Room

Assembly Instructions

1-3/4"

long bolt (G), in the middle of the back, and the washers as shown.

Page 1 of 2

Made in Viet Nam

#21357

Uph Side Chair

Page 1 #21357-1 Aberdeen Page 1 of 2 Made in Viet Nam Dining Room Assembly Instructions Components and Hardware List (for one chair) #21357 Uph Side Chair Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment.
Page 2 #21357-2 Aberdeen Page 2 of 2 Made in Viet Nam Dining Room Assembly Instructions Step 2: Assemble the left and right side stretchers (D) to the chair back (do not install wood screws until after the next step). Step 3: Assembled the middle stretcher (E) between the two side stretchers and assemble the front legs (C) onto the side stretchers and chair seat.