Changing The Power Level (Level) - Sony HVL-F42AM Operating Instructions Manual

Changing the power level
(LEVEL)
Auto flash
The flash unit adjusts the power level automatically when the LEVEL lamp
[AUTO] on the display panel is lit.
Manual flash
The power level for the flash unit can be adjusted.
Press the LEVEL button to select the power level to be set.
• The power level is changed in the following order.
1/1 t 1/2 t 1/4 t 1/8 t 1/16 t 1/32 t AUTO t 1/1 t . . .
• In manual flash photography, if the power level is set at 1/1 then the flash will go
off at full power. The power level range (e.g. 1/1 t 1/2) corresponds to the
aperture range (e.g. F4 t 5.6).
• Change the custom setting when you change the power level for a mode other
than the M mode of the camera (page 44).
• For details on the manual flash, see page 32.
26
GB