Sony S-Frame DPF-VR100 Handbook page 54

Error message
Error reading the Memory Stick. /
Error reading the CompactFlash
card. / Error reading the SD
Memory Card. / Error reading the
xD-Picture Card. / Error reading
the internal memory./ Error reading
the External Device.
Write error on the Memory Stick. /
Write error on the CompactFlash
card. / Write error on the SD
Memory Card. / Write error on the
xD-Picture Card. / Write error on
the internal memory./ Write error
on the External Device.
The Memory Stick is read only.
The Memory Stick is protected.
Memory card format not supported. • For a memory card, use your digital camera or other device
Cannot open the image.
No more USB hubs can be
connected.
Incompatible USB device. Check
device's USB settings.
GB
54
Meaning/Solutions
• An error has occurred. If this error message is displayed
frequently, check the status of the memory card or external
device with a device other than the photo frame.
• For an external device:
The external device may be write-protected. Cancel the
write-protection setting for the device you are using. The
internal memory of a digital camera may be write-
protected.
• For an internal memory:
Initialize the internal memory.
Note
When you initialize the internal memory, please note that all the
image files imported to the internal memory are deleted.
• A "Memory Stick-ROM" is inserted. To save the images,
use the "Memory Stick" recommended.
• A protected "Memory Stick" is inserted. To edit and save
the images, use an external device to remove protection.
to format the memory card.
• For the internal memory, initialize it with the photo frame.
Note
When you initialize the media, all the files on the media will be
deleted.
• The photo frame cannot display or open an image file
whose format is not supported.
• Connect the device directly to the photo frame, or use a
device without a built-in USB hub.
• A mass-storage-incompatible device is connected or the
USB setting on an external device is not set for mass
storage. Connect to a mass-storage-compatible device or
check the USB setting and change it to mass storage on the
external device.