Heating Function; Anti-Freeze Function - DeLonghi TRD40615ECA Instructions For Use Manual

at altitudes exceeding 2000 m (6561
feet).
- The appliance is fitted with a safety
device which will switch off it in case
of accidental overheating. To reset,
please contact Customer Experience,
see enclosed guarantee.
SAVE THESE
INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE
ONLY
DESCRIPTION
A
Display
B On-off button
C
Power setting button
D - Adjustment button
E
+ Adjustment button
F Timer button
G
Brightness button
H Eco button
I
Cord holder
L Wheel
USE
Fitting the wheels
Turn the radiator upside down on a rug or soft surface to
prevent damaging the paint finish. Fully unfold the wheels
by turning them outwards (Fig. 1). Turn the radiator back to
its upright position.
Fig. 1
Important! Always operate the appliance in upright
position only (wheels on the bottom, controls on top). Any
other position could create hazardous situation.
Location
Place appliance on the floor beneath the coldest window
in the room, or any other location. Your appliance will re-
duce the effect of cold drafts. The appliance should not be
placed immediately below a power outlet. Do not use this
appliance in rooms with a floor area of less than 43 square
feet (4 sq. m.).
Power connection
The radiator must be connected to a properly polarized
household outlet in perfect working condition.
The appliance will be set in the off condition.
The display will show the
or bedding, furniture and flammable material away from
the power outlet where the heater is plugged in.
After an interruption of the power supply (power failure or
appliance unplugged) the unit goes always to off.
When the unit is switched on by pressing the on-off button,
the operating conditions will be same ones previously set.
Your product is equipped with a polarized alternating
current line plug (a plug having one prong wider than the
others). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not attempt to modify the plug to
bypass this safety feature.

Heating function

To turn the appliance on, insert the plug into an electrical
outlet then press the
Press button
MIN ( ); MED (
To select the desired temperature, press button + or - (E
or D). By pushing the + or - button once, the temperature
(shown on the display) will increase or decrease by 34°F
(1°C). Holding the + or - button depressed the value will
increase o decrease rapidly.
The appliance allows to set a temperature of 5°C (41°F) and
a range from 10°C to 28°C (50°F to 82°F).

Anti-freeze function

Setting the temperature to 5°C (41°F), the appliance
12
symbol. Keep loose clothing
(B) button.
(C) to set the required power level:
); MAX ( ) (see fig. 2).
Fig. 2