Advertisement
S T E P 2
A.
Prepare
CONNECTIONS
Use a post brush to clean battery
baking soda/water paste or battery cleaner spray. Scrape or brush off
the residue and wash the area with clean water.
B.
Make sure adapter and tester clamp
CONNECTIONS ARE TIGHT.
NOTE: All
SIDE TERMINAL POSTS
must use a proper Side Terminal
Charging Post to ensure the best
testing and charging
results.
THREADED STUD TERMINALS
must use a proper
Group 31 Charging Posts
to ensure the best testing
and charging results.
for testing battery:
posts. Neutralize any corrosion with a
DO NOT USE
Battery Bolt Extenders or Battery
Bolts for testing or charging batteries. This will
cause the tester to give an inaccurate reading.
Battery Bolts
DO NOT USE
Stainless Steel Nuts or the Threaded
Stud for testing or charging batteries. This will
cause the tester to give an inaccurate reading.
Threaded Stud
4
Bolt Extenders
Advertisement
