Setup 1; Lcd Backlight; Language; Beep - Sony MHS-PM1 Handbook

Setup 1

1
The default settings are marked with

LCD Backlight

Selects the brightness of the LCD backlight.
Bright
Normal
• When you connect your camera to the wall outlet (wall socket) using the supplied AC adaptor, [Bright] is
automatically selected for the setting.
• You can change the setting by tilting the multi-selector to v (DISP) longer.
• Selecting [Bright] uses up the battery charge faster.

Beep

Selects the sound produced when you operate the camera.
Shutter
On
Off

Language

Selects the language to be used to display the menu items, warnings, and messages.
Initialize
Initializes the setting to the default setting. Even if you execute this function, the images
stored in the internal memory are retained.
1 Select [Initialize] with the multi-selector tilt to v/V/b/B, then tilt to B.
2 Select [OK] with v, then press the multi-selector.
The message "Initialize all settings" appears.
3 Select [OK] with v, then press the multi-selector.
The settings are reset to the default setting.
To cancel the resetting
Select [Cancel] in step 3, then press the multi-selector.
• Be sure not to turn the power of the camera off while initializing.
For details on the operation 1 page 48
.
Brightens.
Turns on the shutter sound when you press PHOTO.
Turns on the beep/shutter sound when you press the multi-
selector, PHOTO or MOVIE button.
Turns off the beep/shutter sound.
53