Table of Contents
Advertisement
1.
Turn on the power, and set the DVD mode.
2.
Confirm that the "OPEN" will be appeared on the screen.
3.
Insert the Up-Date Disc. Automatic read will start and "Upgrade file detected, Upgrade? Press PLAY key to start"
will be displayed on the screen.
4.
Press PLAY button on the remocon to start upgrade.
NOTE: Do not turn off the unit on the way or operate the keys on the unit and remocon.
Up-Date error will happen and can not be done with the Up-Date of Up-Date Disc.
5.
After the Up-Date, Logo screen will appear.
8.
Unplug the AC cord, then plug it in.
CHECK FOR THE FIRMWARE VERSION
9.
Turn on the power, and set the DVD mode.
10.
Press "SETUP" "SUBTITLE" "1" "2" "3" button on the remote control. Firmware version will be displayed on the
top bottom of the screen.
070123
13:55 SASn 4
When the changed version displays, the Re-write will be completed.
11.
Turn off the power
RE-WRITE FOR DVD FIRMWARE
070123
13:55
Release date (Example: 2007.1.23, 13:55)
SASn 4
Fixed
10
Advertisement
Table of Contents
