1. Regulatory Information 1.1 Compliance The Zivid One camera is compliant with EN 62368 , FCC class A, CE, and CB envi- ronmental standards. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Transport the device in its original packaging or make sure it is properly cushioned during transportation. The Zivid One camera use a white light source, which is tested against IEC62471 and is classified as Risk Group 2. IEC 62471 classifies optical radiation sources based on the level of hazard to the skin and eye.
2. Unboxing In the Zivid box you will find: • Zivid One 3D camera • 24 V power supply • 5 m USB 3.0 cable (Machine Vision Certified) Optional: • Power extension cables, available in 5m, 10 m and 20 m •...
Radeon no longer supports SPIR on some GPUs, please verify your GPU drivers support SPIR to be compatible with Zivid Software. Zivid no longer supports AMD on Ubuntu 16.04 (AMD dropped support for Ubuntu 16.04 as of Radeon Software 18.50 for Linux).
4.2 Mechanical Interface The Zivid One camera has four M6 mounting holes and two Ø5 alignment holes. Use the threaded holes on the bottom side of the device to mount it to a bracket. We recommend using DIN 912 / ISO 4762 Hexagon or ISO 14579 Hexalobular socket head cap screws in stainless steel (A2 or A4).
This also frees up space above the scene for easier access for tools and robots. Ambient light might reduce performance. Consider blocking direct light affecting the scene. Note Camera tilting is more important if the scene contains specular surfaces. Rev 1.3 - 11/2021 Zivid.com...
Signal protection Do not install Zivid cameras and cables next to high voltage devices that can generate high levels of electromagnetic disturbance. Do not route camera cabling through the same trunks/conduits with AC power cables and cables emitting high levels of disturbance.
24V DC +/- 20% (Max 5A) 24V DC +/- 20% (Max 5A) Reserved, do not connect Optional mating connector: TE Connectivity AMP 1838275-3 (Digikey: A97645-ND) It is required to use both pins for 24V and for GND. Rev 1.3 - 11/2021 Zivid.com...
Caution Using a direct cable from the PC to the Zivid camera works better than connect- ing the camera via a USB hub. Use only Zivid approved cables and extenders. Rev 1.3 - 11/2021...
6. Software To download the latest software for your camera, navigate to: www.zivid.com/downloads Visit the Knowledge Base for the installation guide, and then navigate to the Zivid Studio user guide to learn how to capture your first point clouds: support.zivid.com Rev 1.3 - 11/2021...
The Zivid Knowledge Base provides answers for commonly seen issues and ques- tions related to Zivid products, for both software and hardware. You will also find in depth articles about our camera technology, best use practices, different types of 3D imaging methods and structured light, to get a better understanding for how to use this product.
The device contains no user-serviceable parts inside. The product warranty will be void if opened. Follow the below instructions to ensure that your Zivid camera is well maintained: • Check screw connections and connectors at regular intervals. • Do not block the air opening on the front and rear sides of the product.
9. About Zivid Zivid is a market-leading provider of 3D machine vision cameras and software for next generation robotics and industrial automation systems. Its Zivid One and Zivid Two products are regarded as the world's most accurate real-time 3D color cameras and bring human-like vision to the smart factories and warehouses of Industry 4.0.