1. Manuals
  2. Brands
  3. Longse Manuals
  4. Security Camera
  5. LTP24
  6. User manual

Longse LTP24 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
Please read this manual carefully before installation

Advertisement

Table of Contents
loading

Related Manuals for Longse LTP24

Summary of Contents for Longse LTP24

  • Page 1 User Manual Please read this manual carefully before installation...

  • Page 2: Table Of Contents

    Content Important Safety Measures 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 。 Notes 。...

  • Page 3: Important Safety Measures

    Important Safety Measures 1. Please read this manual carefully before installation. 2. All of the warned items should be strictly abided by. 3. The operation and usage instruction should be abided by. 4. Please use the accessories which recommended by the seller. Otherwise, we are not responsible for the damage caused by inappropriate accessories.

  • Page 4: Operation Instruction

    Operation Instruction: Ⅰ Camera Controlling: Press the number button at the bottom part of remote controller to control the camera, each number stands for one address, the system defaulted address is 1, “0” stands for “10”. Ⅱ Pre-set setup: 1: Press “up, down, left, right” Direction Key on the remote controller steer the camera to the required position.

  • Page 5: Ⅵ Connection Diagram

    Ⅵ Connection Diagram Control Anode Cathode RS-485 The IR remote controller can control only 10 pcs domes at present.
  • Page 6 RS-485 Power dome Video Dome #1 Image displaye RS-485 Power dome Video Dome #2 Image displaye RS-485 Dome device controller RS-485 Power dome Video Dome Image displa (Wiring of multi-dome)

  • Page 7: Ⅶ Setting Of Dome Device Communication

    Ⅶ Setting of Dome Device communication Before installation and use, the setting of communic ation Protocol and transmission speed (baud rate) should comply with the control system. 1. Dismantlement of Dome Device. (Shown as illustrations.) ．Setting Protocol and baud rate of dome device. 4 5 6 Setting address of dome Resistance Setting...

  • Page 8: Ⅸ Camera Controlling

    3. Setting of Dome’s Address Setting method: The sum of switch numbers when it is at ON position is the address of dome device. Setting address for dome device (this figure shows the address of dome device No 1). Calculation example of dome device address: (2+4+16=22) The address is 22.

  • Page 9: Specifications

    Specifications SONY/SHARP Image Sensor 1/3inch /1/4inch Video output 1.0Vp-p Horizontal Resolution 420/480TVL IR LED 5mm 24pcs Usable Illumination 0LUX Lens Board Lens 6mm/F2.0 Pan range 360° Pan speed 1~80 degree/second Tilt range 90° Tilt speed 1~80 degree/second Communication RS-485 Preset 16(optional Max 64) Protocal Pelco-P/D...

Table of Contents