Hannlomax HX-203QI Quick Start Manual

ALARM CLOCK RADIO WITH QI WIRELESS CHARGING
AND USB CHARGING(2.4A)
Model :HX-203QI
TO PREVENT ELECTRIC SHOCK; DO NOT USE THIS PLUG WITH AN EXTENSION CORD
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADES EXPLOSURE.
TO PREVENT FIRE OR SHOCK HAZARD; DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
RISK OF ELECTRIC SHOCK
The lighting flash with
arrowhead symbol, with an
CAUTION: TO REDUCE THE RISK
equilateral triangle is intended
OF ELECTRIC SHOCK, DO NOT
to alert the user to the
REMOVE COVER (OR BACK). NO
presence of un-insulated
USER
dangerous voltage within the
INSIDE REFER SERVICING TO
products enclosure that may
QUALIFIED
be of sufficient magnitude to
PERSONNEL.
constitute a risk of electric
shock to persons.
SPECIFICATIONS
Frequency Range: FM: 87.5 - 108 MHz
Power Supply: AC 100-240V ~ 50/60 Hz
Rated Output DC9V 3.5A
USB Charging Current: 2.4 A
Specifications are subject to change without prior notice.
CONNECTING THE UNIT TO POWER
Plug AC power adapter to the AC wall outlet. Before switching on the unit, make sure that the voltage of
your electricity supply is the same as that indicated on the rating plate.
WARNING
CAUTION
The exclamation point within
DO NOT OPEN
an equilateral
intended to alert the user to
the presence of important
operating and maintenance
SERVICEABLE PARTS
(servicing) instruction in the
literature accompanying the
SERVICE
appliance.
-1-
QUICK REFERENCE
1. TUN - / HOUR
Use this button to adjust the hour in CLOCK or ALARM time
•
Use this button to search the radio station in backward direction.
•
2.
TUN+/ MIN
Use this button to adjust the minute in CLOCK or ALARM time
•
Use this button to search the radio station in forward direction.
•
3.
ON/ PRESETS BUTTON
In Clock mode, press and Hold to Set the CLOCK
•
Press this button to turn on the radio
•
In RADIO mode, press and hold this button to store radio stations in the memory.
•
In RADIO mode, press this button to select the stored radio stations in the memory.
•
4.
OFF/ AL 1 / VOL -BUTTON
In Radio mode, press this button to increase the volume.
triangle is
•
In RADIO mode, press and hold this button to turn off the radio .
•
In Clock mode, press this button to set the ALARM 1..
•
5. AL 2 / VOL + BUTTON
In Radio mode, press this button to decrease the volume.
•
In Clock mode, press this button to set the ALARM 2..
•
6.
SLEEP/SNOOZE /DIMMER BUTTON
In Radio mode, use this button to set the sleep time.
•
When alarm activates, use this button to temporarily suspend the ALARM for a short period.
•
In Clock mode, press the button to select the LED display brightness
•
7.
Qi Wireless Charging Pad (Place the Qi supported phone for wireless charging)
8.
ALARM 1 BUZZER INDICATOR (This indicator means it is in ALARM 1 buzzer mode.)
9.
ALARM 1 RADIO INDICATOR (This indicator means it is in ALARM 1 radio mode.)
10.
Qi Wireless Charging Indicator ( This Indicator shows the status the wireless charging)
11.
ALARM 2 BUZZER INDICATOR (This indicator means it is in ALARM 2 buzzer mode.)
12.
ALARM 2 RADIO INDICATOR (This indicator means it is in ALARM 2 radio mode.
13.
USB SLOT FOR 2.4A CHARGING ( Connect a USB cable to charge your device. )
14.
DC Jack ( Connect AC/DC Adaptor)
15. FM ANTENNA (Extend for better FM radio reception)
-2-