Sony Handycam DCR-SX45E Handbook page 34


Connect your camcorder to a TV with the A/V connecting cable (,
supplied) or an A/V connecting cable with S VIDEO (, sold separately).
Connect your camcorder to the input jack of the TV.

Play back movies and photos on your camcorder (p. 27).
To set the aspect ratio according to the connected TV (16:9/4:3)
(MENU)  [Show others]  [OUTPUT SETTINGS] (under
Touch
SET] category)  [TV TYPE]  [16:9] or [4:3] 
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR)
Use a 21-pin adaptor (sold separately) to view playback pictures.

Notes
When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded image's

aspect ratio switches between 16:9 (wide) and 4:3, the image may jitter.
On some 4:3 TVs, the photos recorded in 4:3 aspect ratio may not be displayed full screen. This is not a

malfunction.
When you play back an image recorded in 16:9 (wide) aspect ratio on a 4:3 TV not compatible with the

16:9 (wide) signal, set [TV TYPE] to [4:3].
Tips

To check information (counter, etc.) on the screen of the monitor, touch

others]  [OUTPUT SETTINGS] (under
OUT/PANEL] 
TV/VCR
[GENERAL SET] category)  [DISP OUTPUT]  [V-
 
.

GB

[GENERAL

.
(MENU)  [Show