Selecting The Recording Mode - Sony Handycam DCR-SX45E Handbook


Note
The camcorder may not detect the expected

scene or subject, depending on the recording
conditions.
You cannot use the flash depending on the

scenes detected.
To cancel INTELLIGENT AUTO
Press .
or the detection mode icons disappear,
and you can record with the preferred
settings.
Also, the INTELLIGENT AUTO setting
is canceled if you change the following
settings:
[SCENE SELECTION]

[WHITE BAL.]

[SPOT MTR/FCS]

[SPOT METER]

[SPOT FOCUS]

[EXPOSURE]

[FOCUS]

[TELE MACRO]

[ STEADYSHOT]

[BACK LIGHT]

[FACE DETECTION]


Notes
[ STEADYSHOT] is set to [ACTIVE] when

you set INTELLIGENT AUTO to [ON]. Other
items listed above are reset to their defaults.
[ STEADYSHOT] is still set to [ACTIVE]

even if INTELLIGENT AUTO is switched from
[ON] to [OFF].
Switch the mode of the [
function by MENU operation (p. 66).
STEADYSHOT]
GB


Selecting the recording mode

You can select a recording mode to record
movies from 3 levels. The recording time of
the media may change, depending on the
recording mode. In the default setting,
[ REC MODE] is set to [SP].
Long time recording
(MENU)  [Show

Touch
others]  [
[SHOOTING SET] category).
 Touch a desired setting.
If you want to record high quality
images, select the HQ mode, or if you
want to record longer movies, select
the LP mode.


Touch

Notes
Movies are recorded with MPEG-2 format.

You can select from the following image

qualities. Value such as "9M" is an average bit-
rate, and "M" means "Mbps. "
[HQ] (9M (HQ))

[SP] (6M (SP))(the default setting)

[LP](3M (LP))

If you record in the LP mode, the quality of

movies may be degraded, or scenes with quick
movements may appear with block noise when
you play back the image.
Tips

You can select the [ REC MODE]

for each recording media separately
(DCR-SX65E/SX85E).
High quality
recording
REC MODE] (under
.