Download Print this page
Home Decorators Collection 1006215481 Quick Start Manual

Home Decorators Collection 1006215481 Quick Start Manual

7.5 ft elegant grand fir led pre-lit tree with timer

Advertisement

Quick Links

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be
followed including the following:
READ AND FOLLOW ALL SAFETY
a)
INSTRUCTIONS.
b) This product is for indoor use only. The electrical rating 0.57 A 120 V 60
Hz.
c) Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor applications,
connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If
one is not provided, contact a qualified electrician for proper installation.
d) This seasonal use product is not intended for permanent installation or
use.
e) Do not mount or place near gas or electric heaters, fireplace, candles or
other similar sources of heat.
f) Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
g) Do not let lamps rest on the supply cord or on any wire.
h) Unplug the product when leaving the house, when retiring for the night,
or if left unattended.
i) This is an electric product – not a toy! To avoid risk of fire, burns personal
injury and electric shock it should not be played with or placed where small
children can reach it.
j) Do not use this product for other than its intended use.
k) Do not hang ornaments or other objects from cord, wire, or light string.
l) Do not close doors or windows on the product or extension cords as this
may damage the wire insulation.
m) Do not cover the product with cloth, paper or any material not part of the
product when in use.
n) Do not move the tree by pulling the tree tips or tree branches.
o) This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows, unplug
the product from the outlet. Also unplug any additional strings or products
that may be attached to the product. Replace the fuse as per the User
Serving instructions (follow product marking for proper fuse rating) and
check the product. If the replacement fuse blows, a short-circuit may be
present and the product should be discarded.
p) Read and follow all instructions that are on the product or provided with
the product.
SAVE THESE INSTRUCTIONS.
q)
CAUTION! –
ALWAYS UNPLUG YOUR TREE
FROM ITS POWER SOURCE BEFORE ASSEMBLING OR
DISASSEMBLING.
CAUTION:
1.
The product consists of non-replaceable LED lamps. To reduce the
risk of fire or electric shock, do not attempt to replace lamps or
modify string.
2.
This product can only be used with the original adapter, not other
brands of adapter.
7.5 ft Elegant Grand Fir LED Pre-Lit Tree with
SKU# 1006215481
Pre-Assembly
Package Contents
A. Top Section
B. Upper Middle 
Qty: 1 
Section   
Qty: 1 
D. Bottom Section
E. Stand with an 
Qty: 1
eye bolt 
Qty: 1 
G. Remote Control
H. Fuse 
Qty: 1
Qty: 2 
 
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Open the stand to a 90 degree angle until the hole lines up with the
hole on the tube.
Step 3. Screw an eye bolt into the hole.
Timer
C. Lower Middle 
Section  
Qty: 1 
F. Power Cord 
Qty: 1 
 
I.
Latch 
Qty: 2 
 
 
 

Advertisement

loading
Need help?

Need help?

Do you have a question about the 1006215481 and is the answer not in the manual?

Questions and answers

Summary of Contents for Home Decorators Collection 1006215481

  • Page 1 7.5 ft Elegant Grand Fir LED Pre-Lit Tree with Timer SKU# 1006215481 Safety Information IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. b) This product is for indoor use only. The electrical rating 0.57 A 120 V 60 c) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
  • Page 2 Assembling the tree ii. Indicator lights of timer on control box turn on at 4 position: The tree lights will automatically run through a 4-hours Please remove protective covers from the base of the pole for each tree ON, 20-hours OFF cycle. section before assembling.
  • Page 3 CAUTION! – ● Reorient or relocate the receiving antenna. ALWAYS UNPLUG YOUR TREE FROM ITS ● Increase the separation between the equipment and receiver. POWER SOURCE BEFORE ATTEMPTING FUSE REPLACEMENT. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.