Self-Diagnosis Display/Warning Indicators - Sony Handycam HDR-TD10E Handbook

Up to 26hr full hd on 64gb memory, dual g lens with 10x optical zoom in 3d/12x in 2d, 8.8cm/3.5" 3d lcd
Hide thumbs Also See for Handycam HDR-TD10E:
Table of Contents

Advertisement

Self-diagnosis display/
Warning indicators
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
C:(or E:) : (Self-diagnosis display)
C:04: 
The battery pack is not an "InfoLITHIUM"
battery pack (V series). Use an
"InfoLITHIUM" battery pack (V series)
(p. 106).
Connect the DC plug of the AC Adaptor to the
DC IN jack of your camcorder securely (p. 15).
C:06: 
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13:  / C:32: 
Remove the power source. Reconnect it and
operate your camcorder again.
E:  : 
Follow the steps from  on page 89.
 (Battery level warning)
The battery pack is nearly used up.
Depending on the operating environment or
battery conditions,  may flash, even if there
are about 20 minutes remaining.
(Warning indicator pertaining to
battery pack temperature)
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
(Warning indicator pertaining to
HDMI output stopped by overheating)
Because the temperature of your camcorder
has reached a level where HDMI output
has stopped, no image is displayed on the
connected monitor, etc. Leave the camcorder
until the temperature decreases. However, you
can continue recording on the camcorder.
(Warning indicator pertaining to
memory card)
Slow flashing
Free spaces for recording images are running
out. For the type of memory card you can use
with your camcorder, see page 23.
No memory card is inserted (p. 23).
Fast flashing
There are not enough free spaces for recording
images. After storing the images on other
media (p. 58), delete unnecessary images, or
format the memory card (p. 82).
The image database file may be damaged.
Check the database file by touching
(MENU)  [Setup]  [
Settings)]  [Repair Img. DB F.]  the
recording medium.
The memory card is damaged.
(Warning indicator pertaining to
memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly
(p. 82).
(Warning indicator pertaining to
incompatible memory card)
Incompatible memory card is inserted (p. 23).
 (Warning indicator pertaining to
the write-protect of the memory card)
The memory card is write-protected.
Access to the memory card was restricted on
another device.
GB

(
Media

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdr-td10

Table of Contents