Metro DataVac MET100 User Manual

Single phase prepaid electronic meter

Advertisement

www.metroprepaid.co.za
MET100
(CL710K16)
Single Phase
Prepaid Electronic Meter
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MET100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Metro DataVac MET100

  • Page 1 MET100 (CL710K16) Single Phase Prepaid Electronic Meter User Manual...
  • Page 3: Product Appearance

    1.Product Appearance 2.Technical Parameters Item Parameter Wiring Mode Single Phase Two-wire LNNL Basic Current (Ib) Max Current (Imax) Starting Curren(0.4%Ib) 20mA Rated Voltage (Un) 230V Voltage Range 70% Un ~ 120%Un Frequency(fn) 50Hz ± 5% Accuracy Class Active IEC Class 1.0 Meter Constant Active 1000imp/kWh - 1 -...
  • Page 4: Wiring Diagram

    3. Wiring Diagram 4. LCD Display 4.1. LCD Display characteristics Meter Full Display: Icon Name Function Short code Display 3-digit short code To display electricity quantity, Main screen demand, time, voltage, current and meter ID number etc Tariff Display the current tariff Indicates units of registers: 1 )Power: kW, kVA 2) Energy: kWh, kVAh...
  • Page 5 Icon Name Function Indicates whether the meter is under tampering or not; the tampering event includes open meter cover and open terminal cover. The display mode is Tampering as follows: hand-shaped 1)Disappears; no tampering occurred. 2)Blinks, detect tampering and confirm now.( Instantaneous state set) 3) Keep displaying, tampering event has detected.(confirmation state set)
  • Page 6 Icon Name Function Indicate the quadrant where the meter is operating: Quadrant tag Note: When the meter is no load state, it only displays coordinate symbols, not quadrant symbols. When the meter is in the prepaid Payment mode, the icon keeps display. mode tag In the prepaid mode, blink indicates allow credit alert status.
  • Page 7: Display List

    4.2. Display List: Automatic scroll display list: Short Code Display Items Remaining credit Power down list: In pre-paid mode: Short Code Display Items Remaining credit In post-paid mode: Short Code Display Items Total active energy (forward + reverse) 4.3 LED Indicators Function Active Pulse LED is red, and it blinks during active power consumed.
  • Page 8 5. Electricity Purchasing Process 5.1. Check Meter number Input “6” ”5” and then press button , the meter will auto display 11-digit the meter number in two screens. Note: The displayed number must be the same as the card/barcode (for purchasing electricity).
  • Page 9: Troubleshooting

    If TOKEN has been used, “used” will be displayed as below: 7. Troubleshooting Condition Solution When LCD displays only some symbols, LCD is unclear or energy LED flashes, or Contact Metro Help Desk LCD has stops displaying. LCD has no display and the pulse LED 1.Check whether the wiring doesn’t blink.

This manual is also suitable for:

Cl710k16

Table of Contents