Display Of Program Cycle Time; Starting A Program - Miele G 7106 Operating Instructions Manual

Operation

Display of program cycle time

The estimated duration of the selected
program appears on the display before
the program begins. During the
program, the time left until the end of
the program is displayed.
Each program phase is indicated by a
symbol:

Pre-rinse / Soak

Main wash

Interim rinse

Final rinse

Drying

End
The displayed duration may vary for the
same program. It is influenced by, for
example, the temperature of the
incoming water, the reactivation cycle
of the water softener, the detergent
type, the amount of dishware, and how
soiled it is.
When a program is selected for the first
time, the display will show the average
program cycle time for a cold water
connection.
The program cycle times shown under
"Program overview" refer to standard
test loads and temperatures.
Each time a program is run, the control
module calculates the program cycle
time required depending on the
temperature of the water taken into the
dishwasher and the amount of
dishware.
54

Starting a program

The dishwasher can only be started if
the door is closed.
 Press the Start button.
If necessary, confirm the previously
displayed message with OK.
The program starts.
The Start indicator light will come on.
During the course of the program, you
can use OK to display the name of the
program which is currently running.

Risk of scalding due to hot
water.
During operation, water in the
dishwasher may be very hot.
During operation, only open the door
with extreme caution.