Frequently Asked Questions
Water intake fault
Problem
One of the following
messages appears in
the display:
Open water supply
Intake
Fault F18
76
Possible cause and solution
The water supply is turned off.
Turn on the water supply fully.
Before remedying the fault:
Switch the dishwasher off.
There is a problem with the water intake.
Turn on the water supply fully and start the
program again.
Clean the filter in the water intake (see "Cleaning
the filter in the water intake" under "Cleaning and
care").
The water connection pressure is lower than
50 kPa.
Seek professional advice.
The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see "Water drainage" under
"Installation").
A technical fault has occurred.
Switch the dishwasher off.
Turn off the water supply.
Contact Miele Service.