Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the Wi-Fi light
will be flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the air
conditioner in pairing mode by unplugging it or turning off power at the wall, then plugging
in or turning on power again. Don't press any buttons once power is reconnected – the air
conditioner will then enter standby mode. Once in standby, press and hold the fan button
on the control panel for 3 seconds until the Wi-Fi indicator light begins flashing rapidly.
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the product type from the list of options in the app (Heating & Cooling > Air
Conditioners).
7.
Ensure that the device is in pairing mode, with the example of indicator, and tap
"Confirm light is rapidly flashing".
Advertisement
