Advertisement
Instructions
Place the fan on a dry, flat surface and plug the cord into a suitable 220-240V AC outlet.
• [
]: By touching the display, switch on the fan and it starts its operation according
to the settings. Press the display again for 2 seconds and then you will hear two
confirmation beep and the fan will turn off. The fan can also be turned on and off with
the remote control.
• [
]: By touching the display, increase/decrease the fan speed. Features a total of 9
speed levels. Press +/- button on the remote control to set the fan speed.
• [
]: Maximum fan speed. Press this button on the remote control: the LED display
will shows H for the maximum fan speed. Press +/- button for the fan speed to exit this
mode.
• [
]: Sleep mode. Press this button on the remote control, the LED display will show L
and fan speed will be reduced. Press +/- button for the fan speed to exit this mode.
• [
]: Press the display for 1 second to enter oscillation mode. Press and hold the
button again for 1 second until you hear confirmation beep sound once and then the
oscillation mode is cancelled. The oscillation mode can also be controlled via remote
control.
• [
]: Press this button to turn the timer on or off. The timer settings are 1-8-0. At 0 is
the timer deactivated. (2x confirmation tones).
Advertisement
