Pro Tools(Hui); Getting Started 开始工作 - PRESONUS ioStation 24c Owner's Manual

5 ProTools(HUI)
5.1 Getting Started
5

Pro Tools(HUI)

5.1
Getting Started 开始工作
ProTools (HUI)
Bydefault,theioStation24cisinStudioOneoperationmode.ToswitchtoProTools
operation, pressand holdthe NEXT button while poweringon yourioStation 24c,
then press the Touch button to enable ProTools (HUI) operation.
Once you have connected your ioStation 24c to your computer,
launch ProToolsto set up the ioStation 24c as a HUI device.
默认情况下，ioStation 24c 处于 Studio One 操作模式。要切
换到 Pro Tools 操作，请在开机时按住 NEXT 按钮，然后按
触摸按钮来启用 Pro Tools（HUI）操作。
一旦您将 ioStation 24c 连接到您的电脑，启动 Pro Tools，将
ioStation 24c 设置为 HUI 设备。
1. Go to Setups | Peripherals.
进入 "设置" | "外围设备"。
2. Create one HUI device under MIDI Controllers.
在 MIDI 控制器下创建一个HUI设备。
3. Set the Receive From and Send Tomenus to"ioStation 24c"and #Ch's to 8.
将 "Receive From "和 "Send To " 菜单设置为 "ioStation 24c"，将 #Chs 设置为8。
Click "OK." 点击 "OK"
Your ioStation 24c is now ready to use. Enjoy!
您的ioStation 24c现在就可以使用了。使用愉快!
ioStation24cAudioInterfaceandProductionControllers
Owner's Manual