PRESONUS ioStation 24c Owner's Manual page 27

3 Connecting to a Computer
Cakewalk byBandlab
1. Launch ProTools.
启动 Pro Tools。
2. Got to Setup | Hardware and select your ioStation 24c
from the Peripherals list. Click OK.
进入设置|硬件，从外围设备列表中选择您的ioStation
24c。点击确定。
3. Go to Setup | Playback Engine and select your ioStation 24c
from the menu at the top of the window. Click OK.
进入设置|播放引擎，从窗口顶部的菜单中选择您的
ioStation 24c。单击 "确定"。
1. Launch Cakewalk by Bandlab.
启动Cakewalk by Bandlab。
2. Go to Edit | Preferences
进入 "编辑" | "首选项"。
3. IntheDevicestab,unchecktheoutputdriverfortheGeneric
LowLatency Driver.This is usually on by default, and will
not let you check anything unless it's unchecked.
在 "设备 "选项卡中，取消对 "通用低延迟驱动程序 "输出驱
动程序的选择。通常是默认打开的，并且不会让您勾选任何
东西，除非勾选取消，否则不会让您检查任何东西。
4. Check all the ioStation 24c input and output driver boxes
勾选所有ioStation 24c的输入和输出驱动框。
5. Click the "Apply"and "OK"buttons.
点击 "Apply "和 "OK "按钮。
6. Click the Driver Settings tab
点击 "驱动设置 "标签。
7. Set the Playback Timing Master to:"ioStation 24c Main Out Left"
将播放定时主控设置为。"ioStation 24c主输出左"。
8. Set the Record Timing Master to:"ioStation 24c Main Out Right"
将录制时间主控设置为。"ioStation 24c Main Out Right"。
9. Click the "Apply"and "OK"buttons.
点击 "应用 "和 "确定 "按钮。
ioStation24cAudioInterfaceandProductionControllers