Habitat Hugo 815235 Manual page 2

EN
This manual contains important information that should be kept for
future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Dimensions
Dimensions of the unfolded bed: 196 x 212 x 91 cm.
Bed dimensions: 195 x 140 cm.
Material
Mod.A
Bed base: electro-welded metal.
Mod.B
Bed base: laths.
Cover: 100% polyester.
Backrest padding: expanded polyurethane foam 25 kg/m
Seat cushion padding: expanded polyurethane foam 35 kg/m
Armrest padding: polyurethane foam 21 kg/m
Armrest structure: chipboard reinforced with fir panels.
Structure of seat and backrest: solid poplar, particleboard.
Structure of armrest: particleboard reinforced with multiply panels.
Mechanism: steel.
Mattress padding: polyurethane foam 23 kg/m
Mattress thickness: 11 cm.
Feet: solid beech.
Assembly Instructions
Before beginning assembly, identify all components using the
manual.
In order not to lose components, do not throw the package before
completing the full assembly.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where you
want to install.
Assemble on a clean, flat surface.
Be careful of the risk of pinching / jamming when assembling the
different parts of the sofa.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Beware of sharp objects.
The transformation into bed is realized with a single motion without
moving the seat cushion and backrest.
Do not make changes in the metal mechanism.
Danger of pinching/squeezing when folding/unfolding.
During the first use of the convertible, remove the mattress
protective plastic to prevent the compressed air hinders the proper
functioning of the mechanism when folding the mattress. During
closing of the bed properly position the mattress whose movement
could damage the mechanism.
Do not leave pillows or duvet in bed couch position.
It is recommended to lubricate all mechanical parts to avoid the
creaking of springs, levers or joints etc ...
Hugo - 11/2021
Maintenance
Vacuum or brush the cloth once a week. Dust accumulation
accelerates wear and the colors from fading.
Spills should be removed immediately with a clean and dry dabbing
to absorb the liquid. Do not rub, it may damage the fabric. Variations
in color between the surfaces cleaned and uncleaned might appear.
Avoid direct and prolonged exposure of the product to sunlight. The
colors may fade.
Do not place the product near a heat source (radiator, fireplace...) nor
a moisture source. The heat and humidity can damage the product.
Do not use abrasives.
Cleaning by a professional only.
Return regularly and pat the cushion so it does not wear out and does
not get dirty unevenly.
The cover of cushion can be machine washed in cold water (30°C) with
bleach-free detergent. Dry flat and lay out horizontally for drying. For
drying do not use a hair dryer or a heater for any other use.
.
3
. If in doubt, call a professional to carry out cleaning.
3
.
3
If you have any comments or suggestions regarding this product,
3 . assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.com
or write to this address: HABITAT, 70 AVENUE VICTOR HUGO, 93300
AUBERVILLIERS FRANCE.
1
Keep the label with lot number, it may be useful in case of
BC
complaint.