Cleaning And Maintenance; Troubleshooting - CANGAROO HARMONY User Manual

2.4ghz digital audio baby monitor model

Hide thumbs

Table Of Contents

Table of Contents

Available languages

Plug the adapter into the nearest standard electrical outlet in your home.

3.Pair the devices with each other: the devices should be paired in the factory. If the mother unit doesn't receive any

signal from the baby unit:

-Check if both of the devices are completely charged.

-If they are not, charge them.

4.The sender will switch to stand-by mode to save energy if it does not detect sounds in the surrounding area.

5.Place the receiver in the room you are in.

6.Press the▲ and ▼ buttons on the parent unit to control the sound volume. Press and hold the ▲ button for a few

seconds on the parent unit to turn on the light indicator. If there is sound transmitted from the sender to the receiver the

light indicator will flash.

7. Press the button ▲ with light on the sender to turn on the night light. Press the ▼ button with smaller lamp and a soft

flashing light will turn on.

8.If the battery of the baby or mother unit is exhausted, the power light indicator will flash in red. In this case, charge the

9.If the parent unit is out of range, the indicating lights will start flashing and in the same time alarm will sound.

1. Do not immerse the units or their adapters into water and do not wash under running water.

2. Do not use cleansing spray and liquid cleansers.

3. Before cleaning the units, you have to unplug the supply cord from the mains outlet.

4. Clean the units with soft dry cloth.

5.If you will not use the baby monitor for a long time, store it and its chargers in a cool and dry place.

6. Warning! Children should not play with this product! Store it away from children reach.

7. If the product is damaged and cannot be used anymore, do not throw it away with the household waste. Hand it in at

an official collection point for recycling. By doing this, you help to preserve the environment

8. If you find any damage or missing/ broken parts, stop using the product, until the damages are removed.

9. Do not try to repair the product by yourself. Contact the shop, from which you bought the product.

10.Do not step on the power cord and do not pinch it, especially at the connectors, the plug box, and the point where the

cord comes out of the device.

11.Position the devices and power adapters so that to provide them with the necessary ventilation. Do not cover them

with clothes, towels, blankets or the like.

12.Always unplug the devices during lightning storms or if you are not going to use them for a long time.

PROBLEM

1. Hissing sound during use of the

baby monitor and it is not plugged

to the charger.

2. The receiver makes no sound.

3. Bad signal

Address: Dolo str. 1, Trebich, Sofia, Bulgaria Tel.: + 359 2/ 936 07 90