Flooring Requirements; Handle Removal - LG LMX28983ST Training Manual

TRAINING MANUAL

FLOORING REQUIREMENTS

The refrigerator must be installed on a solidly constructed floor to minimize noise and vibration.
The refrigerator must be level. If necessary, adjust the leveling legs under the front of the
refrigerator to compensate for variations in the flooring. This is easier if the refrigerator is tipped
slightly backward to take the weight off the legs. Turn them clockwise to raise the refrigerator or
counterclockwise to lower it.
Never install the refrigerator on a platform or a weakly supported structure.
When moving the refrigerator for cleaning or service, be sure to protect the floor. Pull the
refrigerator straight out. Do not walk or wiggle it; floor damage or side panel damage may occur.

HANDLE REMOVAL

LMX28983ST
It may be necessary to remove the handles
to get the refrigerator through a door.
Loosen the set screws with a
(2.5 mm) Allen wrench.
Remove the handle.
If the mounting bolts require removal or
adjustment, use a ¼" Allen wrench.
Use extreme caution when removing the
handles to avoid scratching the doors.
When you remove or replace a handle,
push (or pull) firmly but do not damage the
handle or the door by using excessive
force.
Replace the handles by placing the handles
on the mounting bolts and tightening the
set screws.
Page 10
LMX28983ST
3
/ "
32
FOUR DOOR REFRIGERATOR