Biostar NF520-A2 TE Setup Manual page 18

All manuals and user guides at all-guides.com
Motherboard Manual
JUSB2/JUSB3/JUSB4: Headers for USB 2.0 Ports at Front Panel
(JUSB4 is only for NF520-A2 TE/NF520-A2 SE)
This header allows user to connect additional USB cable on the PC f ront panel,
and also can be connected with internal USB devices, like USB card reader.
SATA1/SATA2/SATA3/SATA4: Serial ATA Connectors
(SATA3 and SATA4 are only for NF520-A2 TE/NF520-A2 SE)
The motherboard has a PCI to SATA Controller with 2 channels SATA interf ace,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
16
JUSB2 JUSB3 JUSB4
( JUSB4 i s only f or NF 520- A2 TE/
NF520-A2 SE)
2 10
1 9
Pin
SATA3 SATA4
(On ly fo r NF520- A2 TE/
N F520- A2 SE)
7
4
1
SATA1 SATA2
Assignment
Pin
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
7 Ground
8 Ground
9 Key
10 NC
Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
7 Ground