Sony DSC-T10 Handbook page 96

The cyber-shot t10 - for detail like no other - a stylish and super slim digital camera with double 'anti-blur' technology - combining a super steadyshot optical image stabiliser and high sensitivity, as well as 7.2 effective megapixels, zeiss 3x optical
Hide thumbs Also See for DSC-T10:
Table of Contents

Advertisement

Troubleshooting
The close-up shoot function (Macro/Magnifying Glass) does not work.
(Twilight mode),
mode (page 26).
The date and time are not displayed.
While shooting, the date and time are not displayed. They are displayed only during playback.
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (page 22).
The screen is too dark or too bright.
Adjust the brightness of the LCD backlight (pages 16, 62).
The image is too dark.
You are shooting a subject with a light source behind the subject. Select the metering mode
(page 37) or adjust the exposure (page 22).
The image is too bright.
Adjust the exposure (page 22).
The image colors are not correct.
Set [COLOR] (Color Mode) to [Normal] (page 34).
Vertical streaks appear when you are shooting a very bright subject.
The smear phenomenon is occurring. This phenomenon is not a malfunction.
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] in the
Shoot the subject at a distance closer than the flash range using the flash.
Light the room and shoot the subject.
Dots appear and remain on the screen.
This is not a malfunction. These dots are not recorded (page 2).
96
(Landscape mode) or
(Setup) menu to [On] (page 55).
(Fireworks mode) is selected in the Scene

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cyber-shot dsc-t10

Table of Contents