Kohler K-712 Roughing-In Manual page 2

No change in measurements if connected with drain
illustrated. (K-7103 or K-7103M)
Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
36" (91.4 cm)
Product Information
Drop-in whirlpool
Required accessories:
Jet trim kit
Fixture*: basin area
Bathing 47-1/2" (120.7 cm)
well x 25" (63.5 cm)
water depth
To 12-5/8" (32.1 cm)
overflow
* Approximate measurements for comparison only.
Pump Heater
1.5 hp 1.5 kW
* Approximate measurements for comparison only.
Cut-out template
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circuit-Breaker (ELCB):
Pump/control 208-240 V, 20 A, 50/60 Hz
Locate the outlet behind the whirlpool and within 24"
(61 cm) of the pump.
1019463-1-D
18-1/4"
(46.4 cm)
19-1/4"
(48.9 cm)
1-1/2" OD
K-712-H2 shown
K-9696
top area
55" (139.7 cm) x
29" (73.7 cm)
capacity
64 gal (242.3 L)
V A*
240 11
88051-7
K-712-H2
66" (167.6 cm)
Installation Notes
Install this product according to the installation guide.
Cast iron whirlpools are extremely heavy, making some drop-in
installations difficult. Splitting the deck/surround is recommended
if installing into a deck.
Floor support under whirlpool must provide for a minimum of
1500 lbs (680.4 kg).
Hot water supply should be 70% of capacity or greater.
weight
Installations will vary.
500 lbs
Fixture conforms to ASME Standard A112.19.1M. All dimensions
(227 kg)
are nominal.
2
2-11/16"
(6.8 cm)
9-11/16"
(24.6 cm)
2-7/8" (7.3 cm)
1" (2.5 cm)
3" (7.6 cm)
18"
(45.7 cm)
3-3/4"
(9.5 cm)
Kohler Co.