Sony Cyber-shot DSC-P200 Read This First page 2

5 Shoot images easily (Auto adjustment mode)
5
Holding the camera
1
Select a mode.
Still image (auto adjustment mode):
Select
Movie:
Select
Position the subject in the center of the focus
frame.
Control button
Using the control button
60min
VGA 101
96
Using the flash for
still images
S AF
60 min
60min VGA VGA 101
8 8 96
Checking the last 101 /
Review
Shooting close-up
image you shot
(Macro)
(Quick Review)
101-0029 2005 1 1 10:30 PM
S AF
RETURN
60min
VGA 101
96
Using the
self-timer
S AF
Checking the last still image you shot (Quick Review)
Press b ( ) on the control button.
To cancel, press b again.
• The image may appear rough right after playback starts.
• To delete the image, press (Delete) and select [Delete] with v on the control button, then press z.
Selecting a flash mode for still images
Before step 2, press ( ) on the control button repeatedly until the desired mode is selected.
v
No indicator
Strobes if it is dark or against light (default setting)
Forced flash
Slow synchro (Forced flash)
SL
The shutter speed is slow in a dark place to clearly shoot the background
that is out of flash light.
No flash
• Shooting distance (when [ISO] is set to [Auto])
W side: Approx. 0.2 to 3.5 m (7 7/8 to 11 feet 5 3/4 inches)
T side: Approx. 0.3 to 2.5 m (11 7/8 to 8 feet 2 3/8 inches)
• The flash strobes twice. The first time is to adjust the light quantity.
Shooting close-up (Macro)
Before step 2, press B ( ) on the control button.
To cancel, press B again.
• Setting the zoom all the way to the W side is recommended.
• The in-focus range becomes narrow, and the complete subject may not entirely be in focus.
• The AF speed drops.
Shortest shooting distance from the lens surface
Setting all the way to the W side: Approx. 6 cm (2 3/8 inches)
Setting all the way to the T side: Approx. 30 cm (11 7/8 inches)
Using the self-timer
Before step 2, press V ( ) on the control button.
Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates
(approximately 10 seconds later).
Self-timer lamp
2
Shoot with the shutter button.
Still image:
Press and hold
halfway down to AE/AF indicator
focus Flashing t lit/beeps
.
60 min
FINE 101
VGA
96
. S AF 30 F2.8
AF range finder frame
Movie:
Press fully down
60min STD
6 4 0 101
REC 00:00:02[00:10:48]
Zoom button
To stop recording, press the shutter button fully down again.
Using the zoom
Zoom button
60 min VGA 101 60 min 101
VGA
W T 96 96
W T
1.1 5.0
S AF S AF
• You cannot change the zoom scale while shooting a movie.
• When the zoom scale exceeds 3×, the camera uses [Digital Zoom].
For details on the [Digital Zoom] settings and the image quality t "User's Guide/Troubleshooting" (page
44)
If you shoot a still image of a subject that is difficult to focus on
• If the subject is closer than approx. 50 cm (19 3/4 inches), use the Macro mode (left column).
• When the camera cannot focus on the subject automatically, the AE/AF lock indicator changes to flashing
slowly and the beep does not sound. Recompose the shot and focus again.
Subjects difficult to focus on are:
– Distant from the camera and dark – Reflect light or have a lustrous finish
– The contrast between the subject and its – Flashing
background is poor.
– Against light
– Seen through glass
– Moving fast
To identify items on the screen
t "User's Guide/Troubleshooting" (page 16)
To turn off the LCD screen
Press (Display/LCD on/off) repeatedly. Use the finder for saving battery power, or
shooting images when it is difficult to confirm images using the LCD screen.
button
Shoot still images (Scene Selection)
1
Select SCN.
Press fully down
The shutter sounds.
MENU button
Control button
To cancel the Scene Selection
Set the mode dial to other than SCN.
Scene Selection modes
The following modes are predetermined to match the scene conditions.
Twilight*
Shoots night scenes at a distance
without losing the dark
atmosphere of the surroundings.
Twilight portrait*
Shoots portraits in dark places.
Candle*
Shoot candlelit scenes, without
spoiling the atmosphere.
Soft snap
Shoots portraits of people,
flowers, etc., with a gentle
atmosphere.
Landscape
Shoots landscapes, etc., by
focusing on a distant subject
* The shutter speed becomes slower, so using a tripod is recommended.
To use the functions set by the control button with Scene Selection
Before shooting in step 5, select the settings with the control button. Some functions are not
available, depending on the Scene Selection mode. When you press the button to select functions
that cannot be combined with Scene Selection, a beep sounds. t "User's Guide/
Troubleshooting" (page 27)
View/delete images
6
6
2 1
Press MENU. Select
Scene
SCN WB ISO
3
Select [SCN] (Scene) with b,
then select a mode with v/V.
Scene
SCN WB ISO
• For details on modes, see below.
• The setting is maintained even when the power is
turned off.
Control button
4
Press MENU to turn off the
menu.
5
Shoot with the shutter
button.
To delete images
1 Display the image you want to delete and press
2 Select [Delete] with v, then press z.
To view an enlarged image (playback zoom)
While displaying a still image, press
To undo the zoom, press
High-speed shutter
Adjust the portion: v/V/b/B
Shoots moving subjects in bright Cancel playback zoom: z
places.
Viewing an index screen
Beach Press (index), then select an image with v/V/b/B.
To return to the single-image screen, press z. To display the next (previous) index screen, press
Shoots seasides or lakesides, the
b/B.
blue of the water clearly recorded.
Snow
• SINGLE DISPLAY
Shoots whitish scenes brightly.
To delete images in index mode
1 While an index screen is displayed, press
Fireworks* control button, then press z.
2 Select the image you want to delete with v/V/b/B, then press z to display the
Shoots fireworks in all their
indicator on the selected image.
splendor.
SELECT
3 Press (Delete).
4 Select [OK] with B, then press z.
• To delete all the images in the folder, select [All In This Folder] with v/V in step 1 instead of [Select], then
press z.
2
. Select an image with b/B.
60min
VGA
101 3 / 9
101-0003 2005 1 1 10:30
PM
BACK/NEXT VOLUME
Still image: the image size is displayed
Movie: is displayed
button
button
Movie:
To play back a movie, press z.
60min STD
6 4 0 B
101 10/10
00:00:03
Playback bar
101_0010 2005 1 1 10:30 PM
STOP REV/CUE VOLUME
Rewind/Fast forward: b/B
(Return to normal playback: z)
button
Volume: v/V
Stop playback: z
• Movies with the image size [160] are displayed a size
smaller.
(delete).
60min
VGA
101 2 9 /
To cancel the deletion
Select [Exit], then press z.
Delete
Exit
BACK/NEXT
to zoom in on the image.
.
60min
VGA
101 3 / 9
101-0003 2005 1 1 10:30 PM
• SINGLE DISPLAY
BACK/NEXT VOLUME
(Delete) and select [Select] with v/V on the
(Delete)
To cancel a selection
Select an image you have previously selected for deletion, then
press z to delete the indicator from the image.
TO NEXT