Appendices; Replacing The Button Battery - Canon PowerShot S10 User Manual

Appendices

Replacing the Button Battery

If the date/time settings menu displays when
the camera power is turned on, the button
battery has lost its charge and the date/time
setting has been lost. Purchase a generic
CR2016 lithium button battery and replace it
using the following procedures.
• A button battery is installed in the camera
when it is shipped from the factory.
1 Turn the Mode Dial to
2 Pull the button battery holder in the
direction of the arrow to remove it.
This section contains information on how to
maintain and care for your PowerShot S10 camera.
Troubleshooting, error and function lists are
included.
.
Slip your fingernail
into the slit and
pull out.
3 Pop the old button battery out.
4 Insert a new button battery with the
negative electrode (-) facing up.
5 Replace the button battery holder.
Please reset the date/time after replacing the
button battery. (p. 65)
• The date/time settings menu will
continue to appear when the camera is
powered up after the button battery is
replaced until the settings have been
reset. It is best to reset them right after
replacing the button battery.
(-)
67