Shooting In Auto Mode; Using The Flash - Canon PowerShot S10 User Manual

Shooting in Auto Mode

In auto mode, the focus, exposure and flash
settings are automatically set, making it
possible for anyone to photograph effortlessly.
The resolution (recorded number of pixels) is
preset to Large and the compression to Fine
and cannot be changed.
1 Turn the Mode Dial to the
2 Point the camera at the center of the
subject.
3 Choose how close you wish the subject to
appear with the
4 Press the shutter button halfway and
wait for two beeps to sound.
5 Press the shutter button the rest of the
way. One beep will sound and the shutter
will activate.
30
position.
or button.
• In auto mode, the flash can be set to
Off and the macro and self-timer
features can be used, but the settings
are reset to the defaults when the
Mode Dial is turned to another position.

Using the Flash

Use the flash as required by the shooting
conditions.
1 Turn the Mode Dial to the
• You can also use the flash with the Mode
Dial set to the ,
2 Press the button to cycle through the
flash settings.
(No symbol appears)
Flash fires automatically
as required by the light
levels.
Flash fires using the red-
eye reduction function.
position.
or position.
(Red-Eye Reduction)