WOK Mighty Rest User Manual page 9

 Pay close attention to pinch points on the bed to avoid injury to the patient and/or care
provider.
 During transport, use caution so the bed does not tip or overbalance. Failure to do so
could result in patient and/or user injury as well as damage to equipment or other
property.
 The bed needs to be stored, transported and operated in a temperature range of -5°C to
45°C (23°F to 113°F).
 DO NOT expose the bed to humidity greater than 95%.
Cleaning Instructions
 Before cleaning the bed, be sure to disconnect it from the wall outlet (power source).
Failure to do so could result in electrical shock and could result in patient and/or user
injury as well as damage to equipment or other property.
Maintenance
 The bed requires regular maintenance to uphold performance and avoid premature wear,
damage and injury.
 Failure to follow the service/replacement of hand control instructions could result in
damage to the hand control cable plug.
 Many of the screws and bolts used in the bed are special high-strength fasteners. Contact
an authorized Wheelchairs of Kansas technician to assist if finding the correct fasteners.
If improper fasteners are used, they could result in patient and/or user injury as well as
damage to equipment or other property.
 The bed needs to be stored, transported and operated in a temperature range of -5°C to
45°C (23°F to 113°F).
 DO NOT expose the bed to humidity greater than 95%.
 Before positioning patient on bed, verify all components are secure after adjustments,
repairs, or servicing of the trapeze, single pole patient assist, or any other overhead
components/devices.
 Do not attempt to install, repair, or remove the trapeze,
single pole patient assist, or any other overhead components/devices while bed is
occupied.
 Do not attempt to install, perform maintenance, or use this product without first reading
and understanding these instructions and accompanying documents such as, the User
Manual, Technical Manual, and Work Instructions. If you do not understand these
instructions, or the following applicable warnings and cautions, contact Sizewise at
1-800-814-9389.
Troubleshooting
 Only
authorized
Troubleshooting by unauthorized persons could result in personal injury or equipment
damage.
personnel should engage in the troubleshooting process.
8