Bed Set-Up - WOK Mighty Rest User Manual

Bed Set-Up

1. Position both ends of the bed so that the sections are
lined up with each other.
2. Insert a 5/16-18 x 2 1/2" long Grade 8 bolt in the bottom
holes, each side of the bed. Install and tighten nuts. Lift
both sections of the bed and insert section B into the bolt
on section A. Slowly lower the two sections.
NOTE: For ease of assembly it may be necessary to get
another person to help you.
3. Install the 5/16-18 x 2 1/2 long Grade 8 bolts through
the top holes on each side as indicated in the picture to
lock the two sections together. Install and tighten the
nuts on the 4 bolts.
WARNING: Failure to securely fasten the four
bolts in place during bed set-up could result in
patient or user injury as well as damage to
equipment or other property.
4. Locate the headboard and footboard.
screws, mount the headboard and footboard on their respective
posts.
NOTE: The longer posts are for the headboard and the shorter
posts are for the footboard.
Slip the headboard and footboard mounting posts into outer
receptacles on the bed.
5. Locate the electrical connectors in the middle of the bed
frame and insert them together.
Using the provided
13