Installing Batteries In The Remote Control; Pairing The Remote Control; Voice Search Function; Remote Control Operation Range - Toshiba 32V35KP Owner's Manual

Installing Batteries in the Remote Control

For CT-95028 Remote Control:
1. Slide the back cover to open the battery compartment of the remote
control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends
of the batteries with the (+) and ( - ) ends indicated in the battery
compartment.
3. Close the battery compartment with the cover.
1
2
3
NOTES
• Product image is only for reference, actual product may vary in
appearance.
Handling the Batteries
• Incorrect use of batteries may cause corrosion or battery leakage,
which could cause fire, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• Do not mix old and new batteries or different types of batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them
in accordance with local regulations.
• Battery chemicals can cause a rash. If the batteries leak, clean the
battery compartment with a cloth. If chemicals touch your skin, wash
immediately.
• If you do not intend to use the remote control for a long time, remove
the batteries.
• Remove depleted batteries immediately to prevent battery acid from
leaking into the battery compartment.
Remote Control

Pairing the Remote Control

Only available on certain models and bluetooth remote control.
1. Pair the remote to the TV after you power it on. Keep the remote control
within 10 feet from the TV. Press and hold the menu button at least 3
seconds to start pairing.
2. If the remote paired successfully then a confirmation will display on the
screen. If it did not pair successfully then an 'unsuccessful' message will
display. Repeat the previous steps.
NOTES
• If an unknown error occurred with the remote then it could have been
caused by interference. Try to remove what's causing the interference
and pair it again.
• If an unknown error occurred in the remote control while the battery
power is normal, you can take out the batteries, press any key for 1~2
seconds, and insert them back. Then the remote control will work
normally.
• The remote cannot be paired to the TV while the TV is in standby
mode.

Voice search function

• There is a voice search function in the upper left corner of the
homepage.
• This function will be used by the apk of "Android TV" in your phone
and the apk can be downloaded from Google play store.

Remote Control Operation Range

The remote control can work at a distance of up to 8 meters in front of
the TV set.
1. The remote control angle: taking the remote sensor as an apex, 6 meters
away, its controlled horizontal angle is within ±30°, while the vertical angle
is within ±15°.
2. The operating distance may vary depending on the brightness of the
room.
12