ViewSonic N2752w-1M Service Manual page 32

2.After adjusting, switch to FULL WHITE and check the value of each color.
3.Under the picture NTSC color bar of YPbPr source, select WHITE BALANCE and
press ENTER, The color warm will auto adjust. The act of EHITE BALANCEL is
completed when EHITE BALANCEL disappeared.
4.After adjusting, switch to FULL WHITE and check the value of each color.
1.4.3 Power Consumption Check ( VGA MODE )
A. TIMING: 1360 x 768@60Hz
B. Pattern: 1010UPRIGHTNESS PATTERN
C. BRIGHTNESS=MAX, CONTRAST=MAX.
D. The power that each MODE consumed is shown in Chart 1.
MODE
NORMAL
Stand-by
1.4.4 Check the position of the picture displayed and phase auto adjusting (VGA MODE).
Depend on the TIMING of TIMING TABLE (TABLE 3) to switch MODE in order, stay
about 10 seconds each MODE, it can changed and stored automatically each MODE. We
can't switch over to the next MODE until AUTO ADJUST disappears.
1.4.5 HDMI MODE FUNCTION TEST
A.DVI MODE: Depend on the TIMING of TIMING TABLE (TABLE 3 ) to check MODE
in order.
B.HDMI MODE: make sure the 480i, 480p, 720p, 1080i TIMING is right.
1.4.6 OSD FUNCTION TEST
A. Time: 1360x768@60Hz
B. Pattern: 16*12 pane
C. Make sure that Each FUNCTION has one right action.
1.4.7 DTV FUNCTION TEST
A. Select input source to DTV, Fig.3 will be shown.
1.4.8 YPbPr, S-VIDEO, AV, TV, DTV'S FUNCTION TEST
A. Input YPbPr, S-VIDEO, AV , TV, DTV'S signal and check.
B. Input USA air channel (TABLE 1) and USA CATV channel for TV channel.
C. Under YPbPr MODE, Make sure the 408i, 480P, 720P, 1080i is right.
1.4.9 AUDIO FUNCTION TEST
A. Audio input includes PC AUDIO IN, S-VIDEO/AV AUDIO IN and YPbPr AUDIO IN.
B. Under PC MODE, input PC AUDIO signal, checks whether the action of AUDIO IN is
right.
C. Under S-VIDEO/AV MODE, input L/R AUDIO signal, checks whether the action of
AUDIO IN is right.
D. Under YPbPr MODE, input L/R AUDIO signal, checks whether the action of AUDIO IN
is right.
E. Under HDMI MODE, checks whether the action of AUDIO IN is right.
ViewSonic Corporation
Preset color for N2752W
x=0.283±0.015
Preset color for N2752W
x=0.283±0.015
MAX POWER COMSUMED
150W(max) for 27"
200W(max) for 32"
3 W (max)
y=0.298±0.015
y=0.298±0.015
POWER LED COLOR
GREEN
RED
Chart 1
Fig.3
29
Confidential - Do Not Copy
N2752w-1M