ViewSonic N2752w-1M Service Manual page 17

TV Menu — To set up for TV
It is only active in TV source.
•
Tuner Mode: To select Cable or Air as the TV source.
•
Auto Scan: To auto scan the TV channels. Press ENTER to start auto scanning TV channels.
Press ENTER again at any time to interrupt scanning.
•
TV: To select the TV channel to be skipped. Press ◄► to change channel.
•
Channel Add/Del.: Select Delete to skip the channel appointed, or select Add to restore
the channel appointed.
•
Channel Edit: Press ENTER to edit a name for the channel appointed. Use ▲▼◄► to
select the letters you want, and use BackSpace key to delete backwards. Move the cursor
to OK and then press ENTER to complete and save the channel name. To cancel editing,
choose Cancel or exit without pressing OK.
Setup Menu — To set up OSD window
Setup Menu is active in all input sources.
•
Language: To select a OSD language from English, French or Spanish.
•
Parental: To set up parental control.
ViewSonic Corporation
14
Confidential - Do Not Copy
N2752w-1M