Connecting The Camera To A Computer - Canon PowerShot TX1 User Manual

2.

Connecting the camera to a computer.

1. Connect the supplied interface cable to the computer's USB
port and to the camera's DIGITAL terminal.
Slip a fingernail under the edge of the camera's DIGITAL
terminal cover, lift up and plug the interface cable in all the way.
2. Turn the camera's mode dial to
(playback) and turn on the power.
The camera and computer will be
able to communicate.
If the Digital Signature Not Found window appears, click [Yes].
The USB driver will automatically finish installing onto the
computer when you attach the camera and open a connection.
28
USB Port
Interface Cable
Always grasp the sides of the connector when
disconnecting the interface cable from the camera's
DIGITAL terminal.
DIGITAL Terminal
Interface Cable