Reviewing An Image Right After Shooting; Selecting A Shooting Mode - Canon PowerShot TX1 User Manual

2. Press the shutter button fully to
shoot.
The shutter sound will play and the
image will record. The indicator will
blink red while the image is recorded
to the memory card.

Reviewing an Image Right After Shooting

After a shot is taken, the image appears in the LCD monitor for
approximately 2 seconds.
You can continue to display images regardless of the review duration
setting with the following procedures.
• Keeping the shutter button pressed after a shot.
• Press the DISP. button or the Multi Controller while the image is
displayed in the LCD Monitor.
To stop displaying the image, press the shutter button halfway.

Selecting a Shooting Mode

1.
Turn the mode dial to the desired mode (
In the
1. Push in the Multi
Controller (FUNC./SET)
( ).
2. Press the Multi
Controller
select a shooting mode
( ).
3. Push in the Multi
Controller (FUNC./SET)
( ).
12
See Indicator (p. 5).
See the Advanced Guide: Setting the Image Stabilizer Function (p. 31).
See the Advanced Guide: Setting the Aspect Ratio (Horizontal to Vertical Ratio)
(p. 29).
See the Advanced Guide for the various shooting methods available.
and modes
or to
See the Advanced Guide: Review (p. 23).
See Erasing (p. 20).
).