TCL 39S62 Service Manual page 23

Appendix (3) How to upgrade main SW using USB and RCU
➢ Power on TV.
➢ Copy the SW BIN image "V8-N563T01-LF1Vxxx.bin" into USB stick (pen drive) root path.
➢ Plug USB stick to the TV.
➢ Option-->settings--> Support--> Software update -->By USB. TV will find Vxxx and please do "update".
➢ TV will update SW automatically, and show some notes on TV.
➢ When reflashing is successful, TV should restart automatically after ~4min.
➢ Remember to perform "Factory menuReset ALL" and "Factory menuReset Shop" and then press RCU
"OK/►" key.
➢ Switch off TV by removing AC cord.
➢ Reconnect AC cord to restart TV.
Appendix (4) "How to change Project ID with RCU"
➢
Process following subsequence IR codes to change projectID: 062598+MENU+xxx (xxx:ProjectID, ex: 001)
➢
If it works, the TV will restart automatically.
Appendix (5) "How to upgrade CI+ Key using USB"
➢ Create a new folder named "CI+KEY" on USB stick (pen driver) root path.
➢ Copy corresponding "*.key" files into CIKEY folder.
➢ Under CIKEY folder, create a new folder named "backup" (once the CI key is overwritten, the matching key file
will be moved to this folder)
➢
Plug USB stick to the TV
➢ Go to "Factory menuOther Update CI+ CredentialUpdate From USB" and then press RCU "OK/►"
key
The "Valid" flag should now be enabled (turns to "Yes"), "Custom Code" should display "TCL" and "Serial Num."
field should update with Key number.
➢
Remove USB stick
If unfortunately the process failed, you may need to download new CI key and repeat operation again.
Note⑹:
Appendix (6) "How to upgrade Netflex ESN using USB"
➢ Under USB root path, create a new folder named as "
folder;
➢ Under "esn" path, the key should be named as "
➢
Plug USB stick to the TV;
新建文件夹 (3)Test and Alignment Specification for NT63
nflxk_***
Page 16 of 25
", then copy corresponding ESN KEY bin files into this
esn
",like this
Series (v0 01) 170612
,