Tv Virtual Surround Settings (Tvs) - Sony DVP-NS15 Operating Instructions Manual

Cd/dvd player
Hide thumbs Also See for DVP-NS15:
Table of Contents

Advertisement

Checking the audio signal
format
You can check the audio signal format by
pressing
(audio) repeatedly during
playback. The format of the current audio
signal (Dolby Digital, DTS, PCM, etc.)
appears as shown below.
When playing a DVD VIDEO
Example:
Dolby Digital 5.1 ch
1 : ENGLISH DOLBY DIGITAL
Front (L/R)
LFE (Low Frequency
+ Centre
Effect)
Example:
Dolby Digital 3 ch
2 : SPANISH DOLBY DIGITAL
Front (L/R)
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Centre
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound's
monaural rear audio signals.
• LFE (Low Frequency Effect) signal
Notes
• If "DTS" in "AUDIO SETUP" is set to "OFF,"
the DTS track selection option will not appear on
the screen even if the disc contains DTS tracks
(page 57).
• MPEG audio signals with more than two channels
will appear as shown above (3/2.1, 2/1), but only
the Front (L) and Front (R) signals will be output
from your two front speakers.
Rear (L/R)
3 / 2 .1
2 / 1
Rear
(Monaural)
TV Virtual Surround
Settings
(TVS)
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
If the player is set up to output the signal from
the DIGITAL OUT (COAXIAL) jack, the
surround effect will only be heard when
"DOLBY DIGITAL" is set to "D-PCM" and
"MPEG" is set to "PCM" in "AUDIO
SETUP" (page 57).
1
Press SUR during playback.
The following display appears.
TVS DYNAMIC THEATER
2
Press SUR repeatedly to select
one of the TVS sounds.
See the explanations given for each item
in the following section.
• TVS DYNAMIC THEATER
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
SUR
35
,continued

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents